The tub system should be flushed more than twice a month. Fill the tub with warm water, or leave the water in the tub after you've used it, add two scoops of low-foaming powdered automatic dishwashing liquid to the water and a small amount of household bleach. Turn on the jacuzzi for 5 to 10 minutes, wipe the normal bathtub, drain the water, and then rinse the surface of the bathtub with water. The bathtub is in a hot and humid state for a long time, and a lot of bacteria will grow. Sometimes, the surface looks clean when it is finished, but in fact there are still many bacteria. It is recommended to wipe the surface of the bathtub with boiling water on a regular basis, and do not use disinfectant water casually, because disinfectant water may not kill mold and fungus.
2. Deal with pipeline blockage at any time and disinfect on time
Ducts need to be cleaned once or twice a week to get rid of smells and to keep bacteria out. You can use a product specially designed to clean the sewer, pour it into the sewer, and clean it after 5 minutes. Be careful not to use it in metal pipes. If the bathtub is clogged, first close the drain valve, and then put an appropriate amount of tap water in the bathtub; place a rubber suction device (for dredging the toilet) on the drain valve; while opening the drain valve, suffocate the basin or The overflow hole of the bathtub; then quickly suck up and down to suck out the dirt or hair and clean it up in time. In the case of severe blockage, it can be repeated several times.
3. Clean and wipe with a soft cloth
When cleaning the acrylic bathtub, use sponge or flannel, do not use coarse cloth, scouring pad, do not use any cleaning agent containing granular objects, it is best to avoid direct sunlight and contact with high temperature cigarette butts. Use mild detergents (such as dishwashing liquid), do not use abrasive detergents. Acrylic bathtubs can also use glass water. The cast iron bathtub should be rinsed thoroughly with clean water after each use and dried with a soft cloth.
Tip: If you encounter stubborn stains, you can use a small amount of abrasive cleaner for cleaning. Brush the bottom non-slip surface with soft nylon. Do not scrub with steel balls, wire brushes or abrasive sponges.
4. Cleaning precautions
From top to bottom, wipe the surrounding area of the bathtub first, then wipe the inside of the bathtub. When wiping, wring out the water and then add detergent to wipe. Remember that the detergent cannot be used with abrasive and high-alkaline cleaning products and dark-colored detergents. It is easy to cause the pigment to penetrate into the surface of the tub. After wiping, use a dry rag to dry the water. Do not leave items in the bathtub. They will cause the bathtub to rust and stain the surface.
English
Français
Español
中文简体
